EC Motors: Declarations

Declarations of Conformity

Declarations Applicable Products
Actuators and Position Controllers 2314
Cam Programmer KKC
KKD
KKH
KKP
Actuators 2380...
Actuators 234300009500
234300009501
234300009502
234300009503
234300009505
234300010800
234300010801
UA Motors and Gearmotors UA
UA_____D
UB Motors and Gearmotors UB_____
UB_____A
UB_____B
UB_____D
UB_____F
UB_____J
UB_____M
UB_____V
UC Motors and Gearmotors UC_____
UC_____B
UC_____D
UC_____F
UC_____P
UD Motors and Gearmotors UD_____
UD_____A
UD_____B
UD_____D
UD_____F
UD_____J
UD_____M
UD_____V
UF Motors and Gearmotors UF_____
UF_____A
UF_____B
UF_____D
UF_____F
UF_____J
UF_____M
UF_____O
UF_____V
Synchronous Motor Ø35 mm UNU0 Torque limited
1325...
1335...
Motors and Gearmotors Ø50 mm 1350...
135210244100
1450...
1750...
Motors and Gearmotors Ø64 mm UP
1344...
1364...
1464...
UP_____O
UP_____P
UP_____R
1764...
Actuator UXB204
Actuator UXB402
Actuator UXB501
Actuator UXB502
UXB503

The subsequently stated Johnson Electric product groups do not serve a single and unique application purpose. Those platforms can be widely used in a broad range of machine categories with many different application scopes. Thus, the stated product groups are components in the meaning of the Machinery Directive, and do not need a Declaration of Conformity or Declaration of Incorporation acc. to the Machinery Directive. The base of development for those products has been the household devices standard EN 60335-1 as well as the following standards:

  • DIN EN 60034-1   Rotating electrical machines – part1: Rating and performance
  • DIN EN 60085   Electrical insulation – Thermal evaluation and designation
  • DIN EN 60335-1   Household and similar electrical appliances – Safety –
    Remark: The product fulfills basic insulation requirements acc. to DIN EN 60335-1:2012-10.
    Requirements for protection class I or II according to DIN EN 60335-1:2012-10 have to be fulfilled by customer application.
  • DIN EN 60529   Degrees of protection provided by enclosures (IP code)
  • DIN EN ISO 12100   Safety of machinery – General principles for design – Risk assessment and risk reduction

Relevant Product Groups

  • Cam programmers KK
  • Motors and Gearmotors Ø20 mm UA
  • Motors and Gearmotors Ø36 mm UB
  • Motors and Gearmotors Ø28 mm UC
  • Motors and Gearmotors Ø42 mm UD
  • Motors and Gearmotors Ø52 mm UF
  • Motors and Gearmotors Ø35 mm UNU0 torque limited
    • 1325
    • 1335
  • Motors and Gearmotors Ø50 mm
    • 1350...
    • 1450...
    • 165029203306
  • Motors and Gearmotors Ø64 mm UP
    • 1344...
    • 1364...
    • 1464...
    • UP
    • 1764...
  • Actuators
    • UXB405
  • Water Valves
    • ZFD001
    • ZFD002
    • ZFD003